Written by: Deane Biermeier / Facts Checked by; Ryan Cullenward / Products Tested by Licensed Interior Designers
Freestanding tub fillers, also known as bathtub faucets, are primarily compatible with freestanding bathtubs. The traditional tub fillers are usually mounted on the wall, but it is unlike the traditional tub fillers and directly mounted on the floor, and then it is connected to the tub with the help of the hose. These are preferable for modern homes or those who want to achieve a sleek look. Different finishes and different styles are available in the freestanding tub fillers. Tub fillers give a luxury bathing experience.
Installation of tub filler is more challenging than the installation of other fixtures. Too many steps are involved, and it is crucial to anchor to the floor firmly. The presence of essential tools is necessary, and you must be aware of every step so it will be easy to install them correctly.
In this article, the installation process of freestanding tub filler is explained in every detail.
Before the installation, the tub will be in good condition and adequately level. After preparing the tub then, get ready for the plumbing. Turn off the water supply lines and the primary connection of water. It is essential to disconnect the water connection.
Supply lines are the hoses that come with the bathtub, or you can purchase them separately. Connect these hoses with the hot and cold supply lines and then connect them to the fillers.
Only some tubs are present with already installed drains and overflow. If these two things are absent, they need to be installed. For this purpose, cut the hole on the bottom surface of the bathtub and to install the drain and the overflow.
By connecting the hose, connect the fillers to the supply lines, which are linked to water. Connect the hose to the hot and cold-water supply lines.
Supply lines and hoses are connected, and now install the spout. Attach the spout to the freestanding tub filler and tighten it in its place correctly. Now the installation is almost ready.
Now you are done with every critical step for the installation and turn on the water. After turning on the water, check the working of the freestanding tub filler and the chances of leakage. If there is any leakage, fix it at the right time.
First, get to know about the model of the freestanding tub filler. It is necessary to follow all of the steps mentioned above. It is better to read the instructions and guidelines as well. If you face any problem, consult with the experts to help and guide you.
Drills, wrenches, tape, and hammers are some essential tools. It is better to find a level and silicone caulk also.
The center is the best location for the tub filler. It will be easy to access the tub filler. The tub filler should be near the freestanding bathtub.
Installation of freestanding tub filler is challenging. You must know about the plumbing and have the crucial tools for the installation if someone has doubts, so it is better to hire a plumber.
It may take one or more hours for the installation. If the procedure is complicated, then the process can be complicated. It also depends upon the experience of the installer.
Freestanding tub fillers are suitable or can be installed with freestanding bathtubs. Make sure that the bathtub must be compatible with the tub filler.
Outcomes are not always positive; different problems can occur during installation, such as leakage, connection problems, and water flow issues.
Select the perfect location to install a freestanding tub filler and install the supply lines in the perfect position. Install the drain and overflow, and don’t forget to check the water pressure. You must check the instructions before the installation and turn off the water before the installation properly. After installation, test the working of the tub filler.
Freestanding tub filler is a straightforward process, and it is not hectic. You must pay attention and do every step according to the guidelines like hose connection, supply lines, water connection and many more. After following the guidelines, it will be possible to install the freestanding tub filler successfully in the last caulk around the tub filler base to prevent leakage. Now enjoy your bath and make it memorable.
Disclosure: Sanitarysupply.org receives an affiliate commission on some, but not all, of the products we recommend—but only if you decide to click through to the retailer's site and make a purchase.
Looking for the perfect alcove bathtub that combines comfort, style, and practicality?Whether you’re remodeling your bathroom or replacing an old tub, an alcove bath is a smart choice for saving space while still enjoying a relaxing soak. But not all tubs are built the same—some offer extra elbow room, others focus on easy installation or
Read MoreA foul, sewer-like smell coming from your bathroom sink is not just unpleasant it can also indicate a deeper plumbing issue that needs attention. Whether it’s a one-time problem or a persistent odor, understanding the cause is the first step toward resolving it. Here’s a breakdown of the most common reasons your sink might smell
Read MoreInstalling a bathroom sink may seem like a complicated task, but with the right tools, guidance, and attention to detail, it’s a manageable DIY project that can dramatically improve the aesthetics and functionality of your bathroom. In this comprehensive guide, we will walk you through the entire bathroom sink installation process, covering everything from preparation
Read MoreA clean bathroom sink not only enhances the aesthetics of your bathroom but also promotes hygiene and prevents the spread of bacteria and mold. In this comprehensive guide, we explain exactly how to clean a bathroom sink thoroughly, efficiently, and safely whether you’re dealing with porcelain, ceramic, glass, stainless steel, or natural stone.Understanding the Type
Read MoreNever miss a good story!
Subscribe to our weekly newsletter to keep up with the latest trends!