How to Clean Your Commercial Faucet

April 9, 2024
How to Clean Your Commercial Faucet

Written by: Deane Biermeier / Facts Checked by; Ryan Cullenward / Products Tested by Licensed Interior Designers

  • Home
  • /
  • Blog
  • /
  • How to Clean Your Commercial Faucet

A commercial faucet is an essential component of any restaurant or facility's kitchen. However, daily use can accumulate dirt, grime, and bacteria, compromising its functionality and appearance. This guide shows you how to clean your commercial faucet effectively and maintain it in top condition.  

Why Cleaning Your Commercial Faucet is Important  

Regularly cleaning your commercial faucet provides several benefits, such as:  

  • Keeping the faucet functioning correctly by preventing clogs or leaks  
  • Extending the lifespan of the faucet  
  • Maintaining its appearance and hygiene by eliminating bacteria, dirt, and grime  
  • Complying with health and safety regulations  

Steps to Clean Your Commercial Faucet  

1. Turn off Water Supply  

Before cleaning your commercial faucet, turn off the water supply to prevent water flow or leaks. If you cannot find the shut-off valve, turn off the main water supply to your facility.  

2. Disassemble the Faucet  

Next, disassemble the faucet by removing the handle, spout, and other parts. You may need a screwdriver, pliers, or wrench to remove some features. Refer to the manufacturer's instructions or use a diagram to avoid damaging parts.  

3. Soak the Parts in Cleaning Solution  

Prepare a cleaning solution by combining equal parts of water and vinegar or a commercial cleaning agent recommended for faucets. Soak the disassembled parts in the solution for 30 minutes to loosen any dirt or buildup.  

4. Scrub and Rinse the Parts  

After Soaking 

  • Utilize a soft-bristled brush or sponge to scrub the parts thoroughly. 
  • Pay attention to hard-to-reach areas, such as the inside of the spout or handle. 
  • Rinse the parts with clean water to remove any residue from the cleaning solution.  

5. Reassemble the Faucet  

Once the parts are clean and dry, reassemble the faucet in the reverse order of disassembly. Make sure each part is snugly fitted, and the connections are tightened. Refer to the manufacturer's instructions for clarification on the correct assembly.  

6. Polishing the Faucet 

  • Use a soft cloth or sponge dampened with mild soap and water to clean the surface of the faucet.
  • Rinse thoroughly with clean water to remove any soap residue.
  • For stubborn stains or mineral deposits, use a commercial cleaner specifically designed for faucets.
  • Polish the faucet with a dry, soft cloth to restore shine and remove any water spots.
  • Avoid abrasive cleaners or scrubbing pads that could scratch the faucet's finish.

7. Test the Faucet  

Run hot and cold water to check the correct temperature and flow. Turn on the water flow and test the faucet for leaks or issues. If you notice any problems, disassemble the faucet and check for loose or damaged parts.  

Tips to Maintain Your Commercial Faucet  

Here are some tips to keep your commercial faucet clean and functional:  

  • Clean the faucet regularly, preferably weekly or daily, in high-traffic kitchens  
  • Use a sponge to wipe the faucet after each use to remove any water or dirt  
  • Avoid using abrasive or acidic cleaners that can damage the finish or parts  
  • Inspect the faucet periodically for leaks, drips, or loose connections  
  • Replace any damaged or worn-out parts promptly to prevent further issues  


Cleaning your commercial faucet is a simple but essential task that can prevent costly repairs or replacements down the line. Please don't neglect this critical component of your kitchen or facility and keep it clean and in top shape. By following the steps in this guide and maintaining your faucet regularly, you can ensure that it stays functional, hygienic, and aesthetically pleasing. 

Disclosure: receives an affiliate commission on some, but not all, of the products we recommend—but only if you decide to click through to the retailer's site and make a purchase.

Deane Biermeier - A senior contractor and an experienced freelance writer - expert for reviews

Deane is an amazing freelancer with wide range of skills. He has good ideas and a prominent passion of writing. He is currently working on many websites including Sanitary Supply.

You may also like

Leave a Reply

Your email address will not be published. Required fields are marked

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}

Never miss a good story!

Subscribe to our weekly newsletter to keep up with the latest trends!