If you've noticed that your sump pump seems to be running constantly, it's essential to address the issue promptly. A non-stop sump pump can lead to increased energy consumption, wear and tear on the pump, and potential flooding. This article will explore the reasons behind constant sump pump operation and provide step-by-step instructions to troubleshoot and fix the problem.  

Understanding the Reasons Behind Constant Sump Pump Operation  

1. Insufficient Pump Capacity 

• Ensure that your sump pump is adequately sized to handle the water volume in your sump pit.  
• Calculate the pump capacity required based on the size of your basement and local water conditions.  
• Upgrade to a higher-capacity pump if necessary.  

2. High Water Table 

• Check the water table level in your area, especially during heavy rains or periods of excessive groundwater.  
• Consider installing a secondary sump pump or a battery backup system to handle the increased water volume.  
• Consult an expert to determine the most proper solution for your situation.  

3. Improper Installation  

• Inspect the sump pump installation to ensure it meets recommended guidelines.  
• Verify that the discharge pipe is positioned correctly and slopes away from your foundation.  
• Seal gaps or cracks in the sump pit or surrounding area to prevent seepage.  

4. Plumbing Issues 

• Examine your plumbing system for leaks, particularly in the basement or crawl space.  
• Repair any damaged pipes or fixtures that may be causing water to accumulate in the sump pit.  
• Consider installing a check valve in the discharge pipe to prevent water from flowing back into the pit.  

5. Sump Pump Switch Problems 

• Test the sump pump switch to determine if it is functioning correctly.  
• Clean the switch and remove any debris that may be obstructing its movement.  
• If the switch is faulty or worn out, replace it with a new one.  

Troubleshooting and Fixing Constant Sump Pump Operation 

A. Check Pump Capacity 

Calculate the required pump size based on your basement size and water conditions to ensure your sump pump has sufficient capacity. If your current pump is undersized, upgrade to a higher-capacity model.  

B. Evaluate Water Table Levels 

Monitor the water table in your area, particularly during periods of heavy rainfall or excessive groundwater. Consider installing a secondary pump or a battery backup system to handle increased water volume.  

C. Inspect Installation Quality 

Check the sump pump installation to ensure it meets recommended guidelines. Verify the discharge pipe slopes away from your foundation and seal any gaps to prevent water seepage.  

D. Examine Plumbing System 

Inspect your plumbing system for leaks, especially in the basement or crawl space. Repair any damaged pipes or fixtures contributing to water accumulation in the sump pit. Installing a check valve in the discharge pipeline can stop water from flowing back into the pit.  

E. Test and Replace Sump Pump Switch 

Test the sump pump switch to ensure it functions properly. Clean any debris obstructing its movement. If the switch is faulty or worn out, replace it with a new one.  

Preventive Measures for Constantly Running Sump Pump

1. Check for Proper Sump Pit Size

   • Ensure that the sump pit is adequately sized to handle the volume of water entering it. An undersized pit can cause the pump to run continuously as it struggles to keep up with the inflow.

2. Inspect for Clogs and Debris

   • Regularly check the sump pit and pump intake for any obstructions such as dirt, gravel, or debris that may impede the pump's operation. Clear any blockages to allow for proper water flow.

3. Evaluate the Discharge Pipe

   • Examine the discharge pipe for clogs, bends, or obstructions that could restrict the flow of water away from the pump. Ensure the pipe is clear and properly routed to drain water away from the foundation.

4. Test the Float Switch

   • Verify that the float switch is functioning correctly by manually lifting it to activate the pump. If the switch is stuck or not activating properly, it may cause the pump to run continuously. Clean or replace the float switch as needed.

5. Check Valve Inspection

   • Inspect the check valve in the discharge pipe to ensure it is functioning correctly. A faulty check valve can allow water to flow back into the sump pit, causing the pump to cycle unnecessarily.

Conclusion 

You can address the issue effectively by understanding the reasons behind constant sump pump operation and following the troubleshooting steps in this blog. Remember to regularly maintain your sump pump and seek professional assistance if needed. Don't let a constantly running sump pump put your home at risk of flooding.